EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Cost Controller is often a very efficient photo voltaic controller created for off-grid solar programs. Based on multiphase synchronous rectification know-how, it makes sure optimized Electricity conversion and program security for a variety of photovoltaic (PV) applications.
Vital Functions of your EPEVER Tracer AN Collection Controller
The Tracer AN series utilizes EPEVER Solar Demand Controller technologies for top-quality solar Strength harvesting. Important options consist of:
Multiphase Synchronous Rectification (MSR) for enhanced energy conversion.
Highly developed MPPT Algorithm with >99% effectiveness.
Twin-Phase Charging for enhanced battery existence.
Liquid crystal display Exhibit with serious-time data monitoring.
A number of Load Command Modes such as guide and timer.
Complete Electronic Protections towards overcharging, in excess of-discharging, quick circuits, and reverse polarity.
Phase-by-Action Tutorial to Setting Up the EPEVER Tracer AN Series Controller
1. Unboxing and Making ready the Controller
Ensure all factors are included: Tracer AN device, temperature sensor, conversation cables, and person manual.
Verify the product amount and voltage ratings match your photo voltaic panel and battery technical specs.
2. Mounting the Cost Controller
Choose a nicely-ventilated, dry place close to the battery bank.
Secure the Tracer AN controller utilizing the furnished mounting brackets.
Keep appropriate clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Usually follow correct safety protocols and ensure the method is run off in advance of connecting elements.
Move one: Connect the battery terminals for the charge controller (good to positive, destructive to adverse).
Phase 2: Join the solar panel array for the PV input terminals.
Move three: Connect the load terminals if employing a immediate load connection.
Move four: Double-Examine all connections for polarity and tightness.
4. Configuring the Controller Settings
Electrical power within the controller by connecting the battery first.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, gentle Command.
5. Monitoring and Facts Logging
The Tracer AN Series supports serious-time monitoring using the MT50 distant meter.
Knowledge may be logged by using the RS485 conversation port utilizing software for instance Solar Station Computer system.
Remote checking is feasible with the EPEVER WiFi module.
six. Troubleshooting Common Difficulties
Concern one: No Electrical power Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue 2: Over-Voltage Defense
Verify the photo voltaic array’s voltage rating.
Regulate technique parameters if necessary.
Challenge 3: Click Here No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT settings while in the menu.
Benefits of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation ensures:
Increased Efficiency: Diminished Electrical power losses for the duration of conversion.
Increased Reliability: Steady performance beneath variable hundreds.
For a longer time Battery Everyday living: Constant and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is surely an Remarkable choice for optimizing solar energy technology and increasing battery everyday living. By subsequent the above mentioned set up manual, end users can be certain optimum effectiveness and procedure longevity.